PUBLICATIONS IN JOURNALS FROM 2007-2012

1. M.B. Parappagoudar, D.K. Pratihar, G.L. Datta, Non-linear modelling using central composite design to predict green sand mould properties, Proceedings of the IMechE Part - B Journal of Engineering Manufacture, Vol. 221, Number 5, 2007, pp. 881-895.
2. M.B. Parappagoudar, D.K. Pratihar, G.L. Datta, Linear and non-linear statistical modelling of green sand mould system, International Journal of Cast Metals Research, Vol. 20, Number 1, 2007, pp. 1-13.
3. M.B. Parappagoudar, D.K. Pratihar, G.L Datta, Forward and reverse mappings in green sand mould system using neural networks, Applied Soft Computing, (Accepted, in press)., Vol 8, No. 1, Year 2008
4. M.B. Parappagoudar, D.K. Pratihar, G.L Datta, Linear and non-linear modelling of cement-bonded moulding sand system using statistical regression analysis, Journal of Materials Engineering and Performance, (Accepted in Press).
5. M.B. Parappagoudar, D.K. Pratihar, G.L Datta, Modelling of input-output relationships in cement-bonded moulding sand system using neural networks, International Journal of Cast Metals Research, (Accepted in Press).
6. Mahesh B Parappagoundar, D.K. Pratihar, G.L. Gupta, “Forward and Reverse Mappings on Green Sand Mould System using Neural Networks”, International Journal for Applied Soft Computing, Vol. 8, No. 1, Jan., 2008.
7. A Paper titled “A System for Extracting Product Features from CAD Models – A STEP approach” authored by Shri Arunkumar P & Dr. A.S.Deshpande was published in International Journal of Contemporary Engineering Sciences, Bulgaria, Vol 1, 2008, No. 3, PP 139 – 146
8. A Paper titled “Characterization of Glass / Epoxy Composites under Sea water Immersion” authored by S. Shivakumar has been accepted for Publication in International Journal of Mechanical and Automobile Engg. (IJMAE) in the April 2009 Issue.
9. A Paper titled “Studies on the weathering Behaviour of Glass/ Vinyl Ester and Glass/Polyester Composites” authored by S. Shivakumar and Dr. Shivarudraiah has been accepted for Publication in International Journal on Emerging Trends in Engineering, Technology and Applied Sciences (IJETA) in the July 2009 Issue.
10. Dr A.S.Deshpande, Prof U.N.Chate, and Vinayak.R.Malik Published a paper titled “The Product Redesigning and Development of Key Duplicating Machine – a case study”. In International Journal of Design and Manufacturing.
11. Dr. M.B. Parapagoudar  submitted a paper titled “ Prediction of Flank Wear in Drilling  using Genetic Neural and Genetic Fuzzy Systems ” to  Emerging Jornal on Engineering Science and Technology – SERC Publications ( In Press)
12. Prof.R.P. Bhat and Dr. M.B. Parappagoudar  have  submitted a Paper Titled “Design of fuzzy logic based expert system for forward “ Modeling of Green-Sand Mould System” to International Journal of Mechanical and Automobile Engg. (Accepted and in Press)
13. Prof.R.P. Bhat  has submitted a Paper Titled “Design of fuzzy logic based expert system for forward “ Modeling of Green-Sand Mould System” to International Journal of Mechanical and Automobile Engg. (Accepted and in Press)
14. Prof J.K. Kittur, Dr. M.B. Parappagoudar ..etal Submitted a paper titled “ Linear Modelling of Aluminum Alloy Die Casting Process with conventional Statistical Regression Analysis” to Inter National Journal of Mechanical & Automobile Engg. – SERC Publications ( In Press)
15. Prof. U.N. Chate has submitted a paper titled “Development of River Gauging System” to IJER ( Int. Journal of Engg. Research & Industry Applications)
16. Shri. Shivakumar S published a paper titled “Durability Studies of FRP under Alkaline Solution” in International Journal on Design & Manufacturing Technologies (IJODAM), July 2010 issue.
17. Mrs. Anupama Kallol published a paper titled “An Experimental Study for the Determination of the Effects of Input Machining Parameters on Surface Finish in Electrical Discharge Machining (EDM) Process” in International Journal of Emerging Technologies and Applications in Engineering, Technology & Sciences [IJ-ETA-ETS], Volume 3, Issue 2, July10-Dec10.
18. Shri. Shivakumar published a paper titled “DOE based investigations on effect of input parameters on Heat Affected Zone(HAZ) in Glass Fiber Reinforced Polymer” in International Journal on Mechanical and Automobile Engineering (IJMAE), 5th Feb’11 Special Edition.

PUBLICATIONS IN CONFERENCES FROM 2007-2012

1. Dr. A.S. Deshpande, V.B. Sondur, “Issues involved in single – stage relief valve design”, International conference on modeling and simulation, CITICOMS 2007, 27-29 August 2007, COIMBATORE
2. Shivakumar S. and A.N. Kallol, “Key Issues in Supply Chain Management” presented at the National Conference on World Class Manufacturing Practices” (WCMP-07) held in BEC, Bagalkot on 2-3 April 2007.
3. Vinayak Malik and Arunkumar P., “Re-designing and development of Key duplicating machine using product development approach” Paper accepted for presentation and publication at International conference on “Advances in Manufacturing Engineering” to be held at MIT, Manipal on 24-26 October, 2007.
4. A Paper titled “FRP Composites for Structural Applications” authored by S. Shivakumar  and D.Hanagandi has been accepted for Publication and Presentation in International Conference on Engineering and Technology to be held at Panaji Goa, during  April 23rd to 26th 2009.
5. A Paper titled “Application of Glass / Epoxy Composites for Sea water Immersion” authored by S. Shivakumar and Kotrishi B Gopalpur has been accepted for Publication and Presentation in International Conference on Engineering and Technology to be held at Panaji Goa, during  April 23rd to 26th 2009.
6. A Paper titled “A study of effects of input parameters on the responses in EDM machining process” authored by A N Kallol , Dr.T V.Herwadkar and Dr.A S Deshpande  has been accepted for Publication and Presentation in International Conference on Engineering and Technology to be held at Panaji Goa, during  April 23rd to 26th 2009.
7. A Paper titled “Product innovation through creative thinking” authored by Roopa K Rao and A N Kallol   has been accepted for Publication and Presentation in International Conference on Engineering and Technology to be held at Panaji Goa, during  April 23rd to 26th 2009.
8. A Paper titled “Application of Glass / Epoxy Composites for Sea water Immersion” authored by S. Shiva Kumar and Kotrishi B Gopalpur has been accepted for Publication and Presentation in International Conference on Engineering and Technology held at Panaji Goa, during April 23rd to 26th 2009.
9. A Paper titled “Study of Mechanical properties of FRP composites” authored by S. Shiva Kumar and D. Hanagandi has been accepted for Publication and Presentation in International Conference on Engineering and Technology held at Panaji Goa, during April 23rd to 26th 2009.
10. A Paper titled “A study of effects of input parameters on the responses in EDM machining process” authored by A N Kallol, Dr.T V.Herwadkar and Dr.A S Deshpande has been accepted for Publication and Presentation in International Conference on Engineering and Technology to be held at Panaji Goa, during April 23rd to 26th 2009.
11. A Paper titled “Product innovation through creative thinking” authored by Roopa K Rao and A N Kallol   has been accepted for Publication and Presentation in International Conference on Engineering and Technology to be held at Panaji Goa, during April 23rd to 26th 2009.
12. Prof D.G.Kulkurani had attended international conference on Arts Science, Management & Engineering & presented three papers during 23-25 April 2009.
13. A paper by Shri. Shivakumar S titled “Study of process parameters of drilling Glass Fiber Reinforced Polymer” using DOE Techniques has been accepted for publication in International conference on Innovating Science and Technology [ICISET2011], Rajkot, Gujarat, scheduled from 8th to9th April’11.
14. Shri. J.K.Kittur published a paper titled “Modeling and Analysis of Pressure Die Casting Using Response Surface Methodology” at International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMMT’10) at SIT, Tumkur
15. Shri Arunkumar P & Dr. A.S.Deshpande published & presented a paper on “The Right STEP to Intelligent Manufacturing Information”, at the National Conference on “Advances in Manufacturing Technology & Management” held at JNTU, Hyderabad on 29-30 August 2010.
16. Shri. J.K.Kittur published a paper titled “Modeling & Analysis of Pressure Die Casting using Response Surface Methodology” in the proceedings of International Conference on Modeling, Optimization and Computing, at N.I.T, Durgapur during October 28-30, 2010.
17. Mrs. Anupama Kallol published a paper titled “A Study of Performance in Electrical Discharge Machining (EDM) Process” in International Conference on Operational Excellence for Global Competitiveness-2011 (ICOEGC-2011) from 3rd to 5th February 2011 organized at R.V. College of Engineering, Bangalore.
18. Mrs. Anupama Kallol published a paper titled “Machinability Analysis in Electrodischarge Machining Process” in International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMMT’10) at SIT, Tumkur.
19. Shri. Shivakumar S published a paper titled “Durability Studies of FRP under         Alkaline Solution” in International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMMT’10) at SIT, Tumkur.
20. Arunkumar P and Dr A S Deshpande, “An Intelligent Feature Identification/ Extraction System for Manufacturing Industry using STEP”, published in the proceedings of The International Conference on "Emerging Trends in Engineering", held at NMAM Institute of Technology, Nitte on May 4th & 5th 2011.
21. Arunkumar P and Dr A S Deshpande, “A Feature Based Time-Cost Calculation and Process Planning System for Interacting Features”, published in the proceedings of The 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), held at S.V. National Institute of Technology, Surat on June 06-08, 2011.